C-05-Q106mediumsingle_mcq

The slot of the RAM should be cleaned with—

aa wet cloth
ba hard brush
cfingers
dpetrol

ব্যাখ্যা

A RAM slot collects dust on its contact pins, so it must be cleaned dry with a hard brush rather than any liquid. A wet cloth, petrol, or fingers would leave moisture, residue, or grease that can corrode or short the contacts.

এই অধ্যায়ের আরও প্রশ্ন

C-05-Q107After cleaning, the computer is turned on without installing the RAM to—
C-05-Q108If a beep sound is heard with no RAM installed, the user should—
C-05-Q109If after re-installing the RAM the beep sound persists, this means—
C-05-Q110If there is still no display after installing a new RAM, faulty RAM accounts for at least—
C-05-Q111Which of the following are valid steps for the no-display problem?
C-05-Q112If the system becomes very heated and abruptly shuts down, the first action is to—
C-05-Q113While cleaning the heat sink, which component should NOT be removed?
C-05-Q114Why does the CPU fail to cool when the heat sink is filled with dust?
C-05-Q115After cleaning, the heat sink and fan should be—
C-05-Q116Which steps are correct when troubleshooting an overheating system?

Chapter 5: Computer Maintenance and Cyber Security — সব প্রশ্ন দেখুন (123টি) →